wear resistance的例句大全

Ceramics tile are widely used because they have many good characteristics sue has heat-resistance, abrasion hardness, wear-resistance, acid-proof, low-expansion and low-price.

陶瓷玻化砖具有耐高温、高硬度、耐磨损、耐腐蚀、低膨胀系数、价格便宜等特点，因而其用途非常广泛。

Drug resistance, dustproof, seamless safety, hyguiene, non-toxic, odurless, easy to clean, goodinsulation, wear resistance.

耐药品性佳 、 防尘 、 平滑无接缝、安全 、 卫生 、 无毒 、 无臭 、 易清洁维护 、 绝缘 、 耐磨.

Being aimed at the stressing and damaging reasons of bridge surface layers, this paper mainly deals with the bending resistance test and wear test of steel fiber concrete materials, analyzes the bending performance of steel fiber concrete, and expounds the wear-resisting mechanism.

针对桥面铺装层的受力状况和破坏原因，重点对钢纤维砼材料进行了抗弯强度试验和耐磨损试验，并进行了钢纤维砼弯曲性能分析，闸述了钢纤维砼的耐磨机理；

Wear resistance of the coatings was tested on abrasion tester and the wear appearance of the coatings was investigated by SEM.

在磨损试验机上对其耐磨性进行测试，同时利用扫描电镜对试样的磨损形貌进行观察分析。

PR MMCs has super wear resistance with lower wear coefficient than high-speed steel .

复合材料比 高速钢 的磨损系数低两个数量级,具有更低的磨损系数,因此具有良好的耐磨性.

The hi-Cr cast iron with eutectic composition or the composition a little higher than eutectic demonstrated excellent impact abrasive wear resistance, and adding W, Nb and some other elements had no obvious effect on increasing impact abrasive wear resistance.

共晶成分或稍微过共晶成分的高铬铸铁显示良好的抗冲击磨料磨损能力，而添加W、N等提高抗冲击磨损能力不明显。

The wear resistance of D8 、 D9 were compared with 45 steel's. The wear mechanism was analyzed by observing the wear morphology with SEM.

分析比较了45钢与D8、D9两种耐磨堆焊材料的磨损性能，并利用SEM对这几种材料在混凝土工况条件下的磨损表面形貌进行了现察，分析了它们的磨损机理。

A Study to Increase Wear Resistance of Wear Plate and Wear Ring on Concrete Pumps

提高混凝土泵耐磨板、耐磨环耐磨性的研究

Best for the high overlay welding requirement for hardness, resistance to wear, abrasion, and erosion.

适用于硬度要求高, 耐磨损、耐腐蚀材料堆焊.

Have good flexibility, corrosion, high temperature resistance, wear and tear, tensile, and waterproof.

具有良好的柔软性 、 耐蚀性 、 耐高温 、 耐磨损 、 抗拉性 、 防水性.

They hoped the waiting and the uncertainty would wear down my resistance...

他们希望拖延搁置会瓦解我的抵抗。

The diamond wear-resistance component used for precision equipment for grinding bearing are non-rivalled in China.

尤其是应用于轴承磨削超精设备上的金刚石 耐磨 器件系列产品在国内处于领先地位.

A simple testing method of wear resistance for piston ring and cylinder sleeve is introduced.

本文介绍一种简易的活塞环与气缸套磨损试验方法.

Process of enhancing wear resistance of polycrystalline sintered compact has been studied.

研究了提高多晶烧结体耐磨性的方法.

EHC Global polyurethane rollers offer greater resiliency and wear resistance than plastic or rubber rollers.

依合斯提供的聚氨酯滚轮比起塑料和橡胶滚轮更具弹性和耐磨性.

Excellent wear & impact resistance, suitable for high speed press. It's the unique material of punch dies.

此牌号具有量好的抗弯性能, 用于高速冲床, 制作冲压模具专用牌号.

Milling, planing, impact and percussion. High toughness for medium wear resistance . Well suitable for brazing.

铣削 、 刨平 、 挤压和冲击操作. 在中等磨损条件下具有高的韧性. 很适合硬焊.

Match Arrangement Mix and Match The correlation curves between particle's match and wear resistance are obtained.

针对不同耐磨相碳化钨颗粒的配比，进行了复合合金耐磨性的研究，得出颗粒配比与耐磨性的关系曲线。

And the interaction of three fine powders can improve hardness and wear resistance of welded metal.

三者的交互作用能够提高堆焊层金属的硬度和耐磨性.

They hoped the waiting and the uncertainty would wear down my resistance.

他们希望拖延搁置会瓦解我的抵抗。